Discover Siemens IWLAN
Industrial Ethernet Book Issue 98 / 32
  Print this Page   Send to a Friend  

Motion control for networked PLCs

Advanced Micro Controls: An addition to the ANF1 & ANF2 motion controllers, with network communication, expanding the family of AnyNET Networked Specialty I/O products. AMCI′s ANF1 & ANF2 stepper/servo controllers integrate a network connection and expansion capabilities to provide a modern, versatile motion control solution for any PLC-based system.



The AnyNET I/O ANF1 & ANF2 are 1 or 2 axis motion controllers that communicate with the host controller (PLC or PAC) over the EtherNet/ IP, Modbus-TCP, or Profibus-DP network. The modules offer one or two independent motion control axes that function in an open-loop configuration, or closed loop using the available encoder feedback. Each axis can be used to drive a stepper or a servo with step/direction input capability. The ANF2 can synchronize its two axes, giving users the ability to control linear and circular motions in an XY plane. It easily mounts on a standard DIN rail, simplifying installation and lowering costs.

Advanced Micro Controls


Source: Industrial Ethernet Book Issue 98 / 32
   Print this Page    Send to a Friend  

Back

Sponsors:
Discover Siemens IWLAN
SPS IPC DRIVES 2017
Sensors Midwest 2017

Get Social with us:


© 2010-2017 Published by IEB Media GbR · Last Update: 20.10.2017 · 25 User online · Legal Disclaimer · Contact Us